23
SMS command Meaning
reset 0 Restart the Vitocom 100.
Set parameters will not be deleted.
reset 1 All settings are returned to their delivered condition, except
PIN code.
Note
The Vitocom 100 does not send a reply
SMS following a "reset" command.
Example:
Deleting all previous entries, except the
SIM card PIN code
SMS from the user
1111þresetþ1
Example:
Afterwards, send a new commissioning
SMS to the Vitocom 100 (see
page 28).
During the recommissioning, test the
automatic notification by SMS to the pro-
grammed mobile phone numbers
"mobnr1" and "mobnr2". Repeat this
step at regular intervals to be on the safe
side.
Reinstating the delivered condition
Holding down the reset button "T4" (see
page 12) for at least 30 s completely
resets the Vitocom 100 to its delivered
condition (the PIN code is also erased).
A complete commissioning is then
required.
During the recommissioning, test the
automatic notification by SMS to the pro-
grammed mobile phone numbers
"mobnr1" and "mobnr2". Repeat this
step at regular intervals to be on the safe
side.
Additional SMS commands
Deleting previous entries
5782 277 GB
To Next Page
Loading...
