EasyManua.ls Logo

Viessmann Vitocom 100 - Introductory Information; System Requirements; Heating System; Mobile Network

Viessmann Vitocom 100
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Heating system
The Vitocom 100, type GSM2 is
approved for 1 heating system with or
without heating circuits downstream.
The control unit is connected to the
Vitocom 100 via KM BUS.
Mains socket 230 V/50 Hz
Mobile network:
Ensure adequate GPRS radio signal
from the mobile network at the
Vitocom 100 aerial prior to installation,
check with mobile phone if necessary.
Request SIM card activation at least
3 days before commissioning.
For further information on activation/
registration see the supplied enve-
lope.
Depending on your order, use either
the supplied SIM card or an approved
SIM card.
SIM card requirements:
SMS facility
Bi-directional SMS communication
(sending and receiving)
SIM cards approved for use with the
Viessmann Vitocom:
T-Mobile (standard for Vitocom 100
with SIM card)
Vodafone
E-Plus
Note
The SIM cards have been tested at a ref-
erence location. Perfect operation can-
not be guaranteed in some regions.
Message paths / Message destina-
tions
Mobile phone for receiving and send-
ing messages by SMS.
Up to 2 mobile phones can be speci-
fied as message destinations.
Introductory information
System requirements
5782 277 GB

Other manuals for Viessmann Vitocom 100

Related product manuals