Why is there no picture or sound on my view21 VV107ZRH?
If you're not getting any picture or sound on your View21 DVR, make sure the HDMI cable is securely connected at both ends. Also, check your volume settings to ensure they are not set to minimum or mute.
What to do if my view21 VV107ZRH DVR remote control is not responding?
If your View21 DVR remote control isn't responding, first, ensure the digital box is plugged in and turned on. Aim the remote directly at the front panel, and make sure nothing is blocking the front of the box. Finally, replace the remote control batteries.
Manage system PIN, installation, hard drive format, and view system information.
Step-by-step guide for updating the View21 box software via USB or automatically.
Addresses issues like no signal, no picture/sound, remote control problems, and forgotten PIN.
Solves issues related to WiFi connectivity, streaming, and low signal strength.
Essential safety guidelines and warnings for using the digital box.
Provides resources for help, including helpline numbers, website addresses, and FAQs.
To Next Page
General