ViewSonic VPC-A31-O1 - Using the Device; Selecting an Input Source; IFP Series

11
Using the Device
Selecng an Input Source
IFP Series
To select an input source:
1. Press INPUT/
on the remote control, press the seng buon on the front
panel, or press the Sengs icon from the toolbar to display the Input Sengs
menu.
2. Press ▼/▲/◄/► on the remote control to select the PC source.
3. Press OK/ENTER on the remote control, or touch the input source directly.
4. Press EPG/BACK/
on the remote control, or touch a blank area outside of the
menu to exit.
NOTE: The above image is for reference only and is subject to change without
noce.