Viking DEDO130SS - Partial Oven Removal; Full Oven Removal

20
Partial Oven Removal
WARNING: Disconnect power to oven
before servicing. Follow lockout/tagout
procedures.
CAUTION: The oven is heavy. Use care
when sliding oven out to avoid damaging the
oven, wall, or cabinet.
Condition Requirements:
Door Assembly Removed
Oven Racks Removed
1. Remove two screws (single oven) or four
screws (double oven) that attach the side
of the outer trim to the wall or cabinet.
2. Slide the oven forward.
NOTE
If the oven is advanced past the balance point, use
appropriate bracing under the front of the oven to
avoid excessive tipping.
3. Reverse procedure for installation.
Full Oven Removal
CAUTION: The oven is heavy. Removal
from the installation will require two people.
Use care when removing the oven to avoid
damaging the oven, wall, cabinet, or floor.
Condition Requirements:
Oven Partially Removed
1. Continue to slide oven from the
installation and place it on a protected
surface.
2. Reverse procedure for installation.