24
Door Hinge Removal
Condition Requirements:
Outer Door Panel Removed
1. Remove four screws that attach the hinge
to the door liner.
2. Remove the hinge from the door liner.
3. Reverse procedure for installation.
Oven Rack Removal
Glide Rack
Condition Requirements:
Door Lowered
1. Lift the glide rack off of the rack supports.
2. Reverse procedure for installation.
Standard Rack
Condition Requirements:
Door Lowered
1. Slide the oven rack forward and then lift
the front end to remove the rack from the
rack supports.
2. Reverse procedure for installation.
Oven Rack Support Removal
Condition Requirements:
Oven Racks Removed
1. Remove four screws from each oven rack
support.
2. Reverse procedure for installation.
To Next Page
