29
Convection Baffle Removal
Condition Requirements:
Door Assembly Removed
1. Remove four screws and the oven rack
support from the oven cavity.
2. Remove three screws that attach the
convection baffle to the oven cavity.
3. Reverse procedure for installation.
Convection Bake Element
Removal
WARNING: Disconnect power to oven
before servicing. Follow lockout/tagout
procedures.
Condition Requirements:
Convection Baffle Removed
1. Remove two screws that hold the
convection element to the rear of the oven
cavity.
2. Disconnect two wires from the convection
element.
3. Reverse procedure for installation.
To Next Page
