Viking VCBB536 - Operation; Height Adjustment Procedure

© 2009 Viking Preferred Service
14
Operation
Height Adjustment
Removal of the kickplate allows access to rollers
and stablizing legs for height adjustment.
1. Remove lower kickplate screws using a phillips
screwdriver.
2. Remove upper kickplate screws using a phillips
screwdriver. Remove kickplate assembly.
3. Using a 5/16” head wrench, turn the front (F)
adjustment screws to raise or lower the front of
the refrigerator.
Note: DO NOT use an electric device.
Overtightening can cause damage.
4. Using a 5/16” head wrench, turn the rear (R)
adjustment screws to raise or lower the rear of
the refrigerator.
Note: DO NOT use an electric device.
Overtightening can cause damage.
5. Reinstall kickplate.
2
1