© 2009 Viking Preferred Service
25
Diagnostics
Mode B Functions (continued)
Temperature Offset Calibration
The chart below shows the amount of temperature offset from the factory default temperature setting per
indicator setting.
Indicator
12345678Coldest
Offset
+8 +6 +4 +2 0 -2 -4 -6 -8
Setting Refrigerator Temperature Offset
Press “REF TEMP” pad to enter temperature offset. Refrigerator indicator and one indicator will glow.
The Factory default setting is 8. If setting is not on 8 use HIGHER or LOWER pad to set to 8. Once at default
setting, DO NOT change.
If 8th bar is not illuminated, press “HIGHER TEMP” pad to move default offset to the next warmer setting or
press “LOWER TEMP” pad to move default offset to the next colder setting.
Setting Freezer Temperature Offset
Press “FRZ TEMP” pad to enter temperature offset. Freezer temperature indicator and one indicator will glow.
The Factory default setting is 5. If setting is not on 5 use HIGHER or LOWER pad to set to 5. Once at default
setting, DO NOT change.
If 5th bar is not illuminated, press “HIGHER TEMP” pad to move default offset to the next warmer setting or
press “LOWER TEMP” pad to move default offset to the next colder setting.
8
5
To Next Page
Loading...
