To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit, unless test
procedures require power to be connected. Discharge capacitor through a resistor before attempting to service.
Ensure all ground wires are connected before certifying unit as repaired and/or operational.
WARNING!
Disassembly
26 ©2012 Viking Preferred Service
5. Remove screws securing freezer fan,
disconnect wiring, and repair/replace fan.
6. Reverse procedure to reinstall.
36” Unit
1. Remove fan covers
2. Remove screws, remove rear cover, and
disconnect wiring.
3. Remove screws securing freezer fans,
disconnect wiring, and repair/replace
fans.
4. Reverse procedure to reinstall.
To Next Page
Loading...
