Vimtag VT-361 - Adding a Device

VIMTAG IP VT 361 SECURITY CAMERA
Page
16
• User admin password – Enter the Old password, and a new
password, and then enter the new password again in the Confirm
password field.
• User guest password – Enter Old password, New password, and
Confirm password, as above.
• Binding email – Enter Email address. May be used for receiving
forgotten password.
• Download path – Enter the default address path for downloading
videos and snapshots.
9. To return to the device dashboard, click < Back in the toolbar and then
click the Device tab.
Adding a Device
Before you can begin monitoring activities at locations where you have
placed the Vimtag camera, you need to add one or more devices to your
network. The devices are typically cameras but can also include Cloud Box
storage devices.
Note: To add a device, the VT-361 Security Camera must be turned on
and connected to your Ethernet or Wi-Fi network as described in
Connecting the Camera
.
To add a device:
1. Install and configure a device as described in
2. Installing and
Configuring the Camera.
2. Click Add device on the toolbar. The Add device window opens.