Symbols
Read the instructions before use
Only for in vitro diagnosis
Warning! Read the instructions before using the device
Separate the electric and electronic parts after use
"NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense."
“Changes or modifications not expressly approved by Virbac could void the user’s authority to operate the
equipment.”
CLASS 1 LASER PRODUCT
Contents
1 Speed Reader
TM
analyser
1 power supply cable in 2 parts
1 stylus
1 USB key
1 SD card installed in the reader
1 self-control kit for the reader: Speed System Check
TM
2 rolls of thermal paper
1 10µL pipette
1 50µL pipette
1 100µL pipette
1 first use guide
1 warranty booklet
To Next Page
Loading...