Visioneer NETSCAN 4000 User Manual

118 VISIONEER NETSCAN 4000 USER’S GUIDE
HTTP internal server error Contact your server administrator for further help.
HTTP PUT method not
implemented
The server does not use the HTTP PUT method. The scanner
can’t save the file to this server, contact your system
administrator for help.
HTTP server unavailable Contact your server administrator for help.
HTTP server does not support
HTTP version 1.1
The server does not support HTTP version 1.1 (the type the
scanner uses), contact your server administrator for help.
POP3 server address is wrong Check the IP address of the POP3 server.
Failed to connect POP3 server Contact your network administrator for help.
Failed to login POP3 server Check the login name and password.
LDAP server login error Check the login name and password.
LDAP server IP error Check the IP address of the LDAP server. Or contact your
network administrator for help.
LDAP port error Check if the port number is correct.
LDAP user password error Check if the password is correct.
INFORMATION MESSAGES DURING FILING
Message Action
INFORMATION CODES DURING FAXING
Code Description/Cause
* Please note that when a problem occurs during faxing, only the “Communication Error” will be
shown in the LCD-display. The information codes which indicate possible causes will only be
shown in the Fax Activity Report. To print the Fax Activity Report, simply select “Yes” or “Error
only”, in the “Transmission Report” option, when you press the “Menu” button and choose Fax
Settings and then Options in succession.
0 Fax is done & OK.
0200 Error occurs, but cause is unknown since your fax machine has not received a fax
message from the remote fax machine.
Check the remote fax machine and then try again.

Visioneer NETSCAN 4000 Specifications

General

Brand	Visioneer
Model	NETSCAN 4000
Category	Scanner
Language	English