Visioneer NETSCAN 4000 User Manual

20 VISIONEER NETSCAN 4000 USER’S GUIDE
SPECIFYING THE SCANNER’S NETWORK SETTINGS
1. Turn on the machine. After warming up for a few seconds, the default
working mode is displayed on the touch panel. For example, the
following is for the Copy mode.
Note:
■ If the system administrator has chosen DHCP, then the IP address of
TCP/IP, gateway, subnet mask, and DNS server will be automatically
configured.
■ When installing the scanner for the first time, it is recommended that
the Administrator retain the default system settings. The settings can
be customized at a later date once you are familiar with the operation
and functionality of the scanner.

Visioneer NETSCAN 4000 Specifications

General

Brand	Visioneer
Model	NETSCAN 4000
Category	Scanner
Language	English