SPECIFYING THE SCANNER’S NETWORK SETTINGS 23
SPECIFYING ADMINISTRATOR SETTINGS USING THE SCANNER’S WEB
P
AGE
1. Input the network settings on the control panel, via the soft keyboard,
as described in the preceding section “Specifying the Scanner’s
Network Settings” on page 20.
2. The scanner is designed with an embedded web page to allow the
system administrator to remotely manage the scanner. Simply type the
IP address of the scanner in the URL field of your browser and then
press Enter. The scanner’s embedded web page opens.
3. Click each item on the menu to enter relevant values. For details on
each setting, please refer to the section “Summary of the Menu
Options” on page 27.
To Next Page
Loading...
Need help?
General