CONNECTING THE CABLES 19
Configuring the Scanner
The following settings or destinations must be defined by the system
administrator before the scanner is used to distribute the scanned
document on the network.
■ Network and E-mail parameters: Defines the parameters for TCP/IP,
SMTP, and POP3 protocols to send your scanned document to e-mail
addresses.
■ Filing Destinations: Defines the protocols and destinations to send
your scanned document to FTP servers, web, or any personal computers
on the network.
To specify these settings or destinations, the administrator can enter a
relevant value in the Menu options on the control panel. In addition to
using the control panel, the scanner allows the administrator to remotely
configure the machine by either launching the scanner’s embedded web
page (Web Image Monitor) or starting the Network Management Tool
provided in the supplied Scanner Driver CD-ROM.
The scanner’s embedded web page (Web Image Monitor) allows the
administrator to configure each machine remotely, with a web browser,
while the Network Management Tool allows the administrator to update
the scanner and manage several scanners on the network. For more
information on how to use the scanner’s Network Management Tool,
please refer to the online help for the Network Management Tool.
To Next Page
Loading...
Need help?
General