120 VISIONEER NETSCAN 4000 USER’S GUIDE
0226 1. Your fax machine received an invalid fax message from the remote fax machine.
Please try again or use another line.
2. The line quality is poor. Please try again or use another line.
3. If the error still occurs, please call your service support.
0229 1. Your fax machine received an invalid fax message from the remote fax machine.
Please try again or use another line.
2. The line quality is poor. Please try again or use another line.
3. If the error still occurs, please call your service support.
0230 1. Your fax machine received an invalid fax message from the remote fax machine.
Please try again or use another line.
2. The line quality is poor. Please try again or use another line.
3. If the error still occurs, please call service.
0234 Memory Full
1. Check if the printer is connected. If the printer is not connected, the scanned
image will be stored in the scanner’s memory.
2. Your printer may have an error. Check and resolve the problems.
3. Check if there are “Send Later” jobs. These jobs are waiting in the scanner’s
memory to be transmitted later. Send these transmissions immediately to free
memory in the scanner.
4. The amount of system memory is not enough to process the scanning job.
Press “Start” to send the pages successfully scanned or “Stop” to abort the job.
Try rescanning using a lower resolution or try sending fewer pages at once.
0237 1. Your fax machine received an invalid fax message from the remote fax machine.
Please try again or use another line.
2. The line quality is poor. Please try again or use another line.
3. If the error still occurs, please call your service support.
0238 1. Your fax machine received an invalid fax message from the remote fax machine.
Please try again or use another line.
2. The line quality is poor. Please try again or use another line.
3. If the error still occurs, please call your service support.
INFORMATION CODES DURING FAXING
Code Description/Cause
To Next Page
Loading...
Need help?
General