Visioneer NETSCAN 4000 User Manual

28 VISIONEER NETSCAN 4000 USER’S GUIDE
Network Setting : Used to specify the scanner’s network settings.
Item Description
DHCP Enable If you have a DHCP server available on your network and the
DHCP has been enabled, the IP address, subnet mask, gateway, and
DNS server will be automatically given.
Choice: ON, *OFF
IP Address The Internet Protocol (IP) address assigned to your machine by your
network administrator.
Subnet Mask The subnet mask address assigned by your network administrator.
Gateway IP The gateway IP address assigned by your network administrator.
DNS Server The Domain Name Server assigned by your network administrator.
* Factory Default
Mail Server : Used to specify the scanner’s mail server information.
Item Description
Device E-mail Address Account
Device E-mail
Address
Enter the email address of the device. This is also the default “From”
address when you are sending email from the device.
OutBox Server
(SMTP) IP or
URL
Enter the SMTP IP or SMTP URL address.
Port # Enter the port number of the SMTP server.
* 25
Authentication
Method
Enter the email authentication method.
Choice: *None, SMTP, POP3
Login Name Enter the login name for SMTP or POP3 authentication.
Password Enter the password for SMTP or POP3 authentication.

Visioneer NETSCAN 4000 Specifications

General

Brand	Visioneer
Model	NETSCAN 4000
Category	Scanner
Language	English