Visioneer NETSCAN 4000 User Manual

50 VISIONEER NETSCAN 4000 USER’S GUIDE
Since the scanner will check whether the directory for saving the file really
exists, before proceeding with file saving, and then writing the file after
scanning to the specified directory, you have to set the directory for saving
files as “browse” and allow write access in the Web Server; otherwise, the
scanner will not be able to write the file into the directory.
If you wish to use the scanner to save files, in addition to changing some
settings in the Web Server, you will have to confirm the account with the
privilege of writing to the Web Server; otherwise, the scanner will not be
able to “write” the scanned file to the file system.
The following uses the IIS setting for anonymous access to Microsoft
Windows 2000 as an example, and assumes the HTP application is
installed in the root directory of IIS, C:\Inetpub\wwwroot\Xcabinet, and
the directory for file saving is C:\Inetpub\wwwroot\Xcabinet. For non-
anonymous access, refer to IIS for more detail information.

Visioneer NETSCAN 4000 Specifications

General

Brand	Visioneer
Model	NETSCAN 4000
Category	Scanner
Language	English