SENDING YOUR DOCUMENT TO E-MAIL 91
Black&White ■ Multi-Level (Gray): Choose “ON” if you wish to make grayscale
copies or *OFF to make B&W (single-bit) copies.
■ File Format: Choose a file format for your scanned image.
Grayscale choices include: *PDF, TIFF, JPEG, MTIFF
Black&White choices include: *PDF, TIFF, MTIFF
■ Compression Level:
Choices: *Low, Medium, High
(If you choose ON from Multi-Level (Gray), the file formats include
PDF, JPEG, TIFF, and MTIFF. If TIFF or MTIFF is selected as
your file format, the compression Level is limited to Raw only.
If you choose OFF from Multi-Level (Gray), the file formats include
PDF, PCX, TIFF, and MTIFF. The compression Level of MTIFF or
TIFF includes G3, G4, and Raw.)
* Factory Default
Note:
■ If you make a mistake during the process, press the Stop button on the control
panel to cancel the operation.
■ The machine allows you to send the scanned document(s) to multiple e-mail
addresses. After inputting the first e-mail address, simply press the enter key, on the
soft keyboard, to type another address in the next line.
■ Up to 64 characters can be entered in the File Name of Attachment, “To”, “From”,
“Reply to”, “Subject”, and the “Text” fields.
■ If you wish to scan a multi-page document and convert it to a single image file,
choose your output file format to be MTIFF or PDF.
■ If you want to scan multiple pages from the flatbed, or more than one set of 50
pages from the ADF, press the Bind button first. After the first flatbed or ADF scan
finishes, you will be prompted to bind to the next scan. Place the next page on the
flatbed, or document batch in the ADF, and press Bind to continue. After you are
done scanning all pages in the document, choose End to close the dialog box.
Item Description
To Next Page
Loading...
Need help?
General