VisionNet FS-9510HD - Receiver to TV with Analog A;V Output; Connecting to Dish; Using Single DISH

2. Receiver to TV With Analog A/V Output
z Connect the satellite antenna cable to LNB IN.
z Connect the Component to the Component input of the TV.
z Connect the RCA to the RCA input of the TV.
NOTE : The component connection(YPbPr) is recommended for Digital TV.
The composite connection(RCA cable) is recommended for analogue TV
3. Connecting to Dish
3.1 Using Single DISH
Connect the Satellite Antenna cable to LNB IN.
16