Visonic PowerMax Complete - Chime and Message Playback; Chime Function ON;OFF; Message Playback

SPEECH AND SOUND CONTROL
14 D-302755 PowerMaxComplete User's Guide
When you release the button, the display will revert
to the normal status-displaying mode, but will also
indicate that a message is waiting. For example:
READY HH:MM
(alternating)
READY MSG
To check your own message, listen to it within one
minute from the end of recording (see Chapter 3 -
Message Playback). This way the MSG indication
will not be erased.
Message Playback
To listen to a message left by another user of the
system:
Click and listen. PLAY will be displayed and
the message will be played back over the built-in
loudspeaker. When the playback ends, the display
will revert to the normal status-displaying mode. If
more than 1 minute elapsed after recording, the
MSG indication will disappear.
Chime ON/OFF
You can disable / enable the chime zones by
alternate clicking of the <8> key, as shown below:
PRESS
RESULTANT DISPLAY
CHIME ON
CHIME OFF

READY HH:MM
CHIME indicator lights steadily when “chime on”
is selected.