Visonic PowerMax Complete - Remote Commander and Keypad Operation; MCM-140+ Remote Commander; MKP-150;MKP-151 Keypad

APPENDICES
D-302755 PowerMaxComplete User's Guide 39
MCM-140+
The wireless remote commander is used to control
single or all partitions.
Arming/Disarming All Partitions
To arm all partitions, press the HOME / AWAY /
DISARM button followed by the user code.
Arming/Disarming a Single Partition
To arm/disarm a single partition, press the "LIGHT"
button followed by the desired partition number (1, 2
or 3). When the red LED turns OFF, press the
HOME/AWAY/DISARM button within 5 seconds
followed by the user code.
MCM-140+
2
#
5
8
0
*
3-color
LEDBuzzer
Away
Home
Light
Off
Fire
Aux
Panic
Prog.
mode
Emer-
gency
MKP-150/MKP-151
The two-way wireless keypad is used to control single or all partitions and functions in the same way as the
PowerMaxComplete control panel. See the section on "The Show Function" above (substitute the
button with the button).