Visonic PowerMax Complete User Manual

2 D-302755 PowerMaxComplete User's Guide
Compatibility of this Manual
This manual should be used with PowerMaxComplete v2.0.00 and above.
Quick Guide To Primary Alarm Control Operations
QUICK REFERENCE TO PRIMARY ALARM CONTROL OPERATIONS
Active Partition Selection (when partition is enabled)  + [PARTITION NO.]
Arming AWAY ........................................  + [Code]*
Arming AWAY-INSTANT ........................  + [Code]* + 
Arming HOME ........................................  + [Code]*
Arming HOME-INSTANT .......................  + [Code]* + 
Arming AWAY-LATCHKEY ...................  + [Code]* + 
Force Arming AWAY (system not ready)  + [Code]* +  (to silence the protest buzz)
Force Arming HOME (system not ready)  + [Code]* +  (to silence the protest buzz)
Disarming and stopping alarms ............  + [Code]
* The factory default master user code is 1 1 1 1. The code is not required if quick arming has been permitted by the
installer. Change the factory default code to a secret code without delay (see section 7)
Contact list form
Dear Customer,
Thank you for choosing PowerMaxComplete, a
highly advanced wireless alarm control system
produced by Visonic Ltd.
Please note below the installer's telephone number
to facilitate obtaining assistance.
Company Name: ____________________________
Telephone Number: __________________________
Person to Contact: ___________________________
Also please make sure that you have the name and
telephone number of the central station your system
will report to. If you ever call the central station to ask
questions, you should be able to come up with your
"ACCOUNT NUMBER" used to identify your alarm
system to the central station. Obtain this information
from your installer and write it.
Monitoring Station’s Name _____________________
Telephone Number: __________________________
My Account Number: _________________________
If you or your installer set the system to contact
private telephone numbers, note down the 4
telephone numbers that your installer programmed to
be called:
Phone No. 1: _______________________________
Phone No. 2: _______________________________
Phone No. 3: _______________________________
Phone No. 4: _______________________________
Luminous Indicator Signals
Indicator
Behavior
Significance
(red)
Lights steadily
The system / a system partition(s) is in the armed state (AWAY MODE)
Flashes
The system / a system partition(s) is in the armed state (HOME MODE)
No light
The system is presently in the disarmed state
Note (*): Refers to the selected partition(s). If control panel is set to a single
partition, then operation performed on other partitions will not be displayed.
(orange)
Lights steadily
The system / a system partition(s) (*) is presently in a state of trouble
No light
No trouble - all is well
Note (*): Refers to the selected partition(s). If control panel is set to a single
partition, then operation performed on other partitions will not be displayed.
(green)
Lights steadily
The chime function is active - chime zones will chime when disturbed.
Note: The chime indicator lights steadily when at least one partition is enabled.
No light
The chime function is inactive - chime zones will not chime when disturbed.
(green)
Lights steadily
AC power is supplied to the control panel
No light
The system is operating on backup battery power

Visonic PowerMax Complete Specifications

General

Operating Temperature	0°C to 49°C (32°F to 120°F)
Type	Wireless Security System
Communication	GSM, PSTN, IP
Battery Life	Up to 24 hours
Wireless Range	200m (open space)
User Codes	up to 8
Event Log	250 events
Remote Control	Yes
Siren	Built-in siren
Event Reporting	Contact ID, SIA
Compatibility	Visonic wireless devices