Visonic PowerMax Complete - Date Format, Scheduler, and Installer Mode; Setting Date and Date Format; Scheduler Function Details; Installer Mode Access

USER SETTINGS
32 D-302755 PowerMaxComplete User's Guide
Setting the Date and Date Format
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
button (repeatedly, if necessary) until
the display will read SET DATE&FORMAT.
From here, proceed as follows:
PRESS
RESULTANT DISPLAY
DATE MM/DD/YYYY
If not satisfied
press
DATE DD/MM/YYYY
DATE _ _ / _ _ /_ _ _ _
[Enter date]
(e.g.
01/01/2002)
DATE 01/01/2002
DATE 01/01/2002
DATE DD/MM/YYYY
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
. When <OK> TO EXIT is displayed - click
.
Scheduler Function
The Scheduler enables to start and stop activity of
the desired devices. You can select the day (Sunday,
Monday, Tuesday, Wednesday, Thursday, Friday,
Saturday, or daily) and then select the scheduled
activity start/stop of the desired device. The process
is demonstrated in "figure 8 DETAIL A".
Installer Mode
If the feature USER PERMIT was enabled by the
system installer, the installer will be able to access
the INSTALLER MODE only by using this menu,
meaning that the INSTALLER MODE (described in
the installer guide) can be accessed only with user
permission (by using the user code).