Figure 2. System Configuration
System Features
Your PowerMaxComplete offers a large number of
unique features:
30 zones: Each protected zone is identified by
number and by name (ask your installer to assign
names to your zones).
3 Partitions (optional): One of the advantages of
the PowerMaxComplete is its ability to divide the
system into a maximum of 3 partitions. Each
partition may be viewed as a separate security
system, each of which can be armed and disarmed
individually individually or altogether in one
operation.
Multiple arming modes: AWAY, HOME, AWAY-
INSTANT, HOME-INSTANT, LATCHKEY and
BYPASS.
Liquid crystal display (LCD): Plain-language
status information and prompts are displayed on
the front panel in large, clear letters.
Real-time clock: The present time is visible on the
display.
Various reporting destinations: Events are
reported automatically to central monitoring stations,
private telephones of your choice, and even by SMS
if GSM is installed.
Selective reporting: Your installer can determine
what type of event will be reported to which
destination.
Latchkey mode: An automatic “Latchkey” message
is sent to chosen telephones if the system is
disarmed by a “latchkey” user (a junior family
member, for instance).
Spoken announcements and instructions (not
applicable in PowerMaxComplete that does not
have VOICE option): Status- dependent, pre-
recorded verbal messages are heard over the
built-in loudspeaker (if the voice prompts are
enabled - see chapter 7).
Message exchange (not applicable in
PowerMaxComplete that does not have VOICE
option): Before leaving the premises, you may
record a short verbal message for other users of the
system who may arrive later. Upon arrival, you can
listen to verbal messages left by others for you.
Keypad and wireless control: Full control from
the keypad; major functions can be carried out by
pressing buttons on hand-held miniature
transmitters.
Access from remote telephones: You may
access the PowerMaxComplete from a remote
telephone and Arm/Disarm it or receive system
status information.
To Next Page
Loading...
