59
ВАРШ.201219.009РЭ
Customize: Shown in live view based on your own settings’
time to start/end Night Mode
The value of the light sensor, allows you to navigate when set-
ting the automatic mode of the Day-Night Threshold and Night-
Day Threshold
With the combination of the High Beam and Low Beam, The
IR LEDs technology has been upgraded to provide better image
clarity and quality regardless of the object distance. Also, the
Low Beam and High Beam's brightness can be adjusted manu-
ally or automatically on the basis of the Zoom ratio. Moreover,
with the IR anti-reflection panel, the infrared light transmit-
tance is highly increased.
Support to set the strength of the IR to Auto Mode or Custom-
ize to achieve the best effect.
IR illumination level of near and far range
Level of the
flashlight bright-
ness
Controls the brightness level of the flashlight.
Select indoor or outdoor mode. Allows you to select the appro-
priate exposure level, maximum exposure time and IR-CUT in-
terval.
There are three options available, you can select one to meet
your need
Off: Keep the image in normal direction
Clockwise 90°: Rotate the image by 90° clockwise
Anticlockwise 90°: Rotate the image by 90° anticlockwise
There are four options available, you can select one to meet
your need
Off: Keep the image in normal direction
Rotating 180°: Upside down the image
Flip Horizontal: Flip the image horizontally
Flip vertical: Flip the image vertically
For the Fisheye series only, turn on/off the distortion removal
from the fisheye lens.
This function is only for Dome-series. If Dome is equipped
with a Smoked Dome
Cover, enable this function to display a normal image.
There is an option to turn On/Off the IR LED.
IR Balance Mode would avoid the problem of overexposure
and darkness.
To restore white objects, removed color distortion caused by
the light of
the environment
Auto White Balance: This option will automatically enable
the White Balance function
To Next Page
Loading...