EasyManua.ls Logo

VisorJet VJS-B620-2-LPR - Page 60

Default Icon
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
60
ВАРШ.201219.009РЭ
Tab
Button
Description
Manual White Balance: Set Red Gain Level and Blue Gain
Level manually.
Incandescent Lamp: Select this option when light is similar
with incandescent lamp
Warm Light Lamp: Select this option when light is similar
with warm light lamp
Natural Light: Select this option when there is no other light
but natural light
Fluorescent Lamp: Select this option when light is similar
with Fluorescent Lamp
Schedule mode: Select this option that you can customize the
schedule to enable/disable above modes
Defog Mode
Better image effect in foggy weather
Reduce Motion
Blur
Enable this function to reduce the motion blur of objects effec-
tively
Exposure Mode
Allows you to set the exposure time:
Auto Mode: The camera will adjust the brightness according
to the light environment automatically;
Manual Mode: The camera will adjust the brightness accord-
ing to the value you set, you can set the exposure time from
1~1/100000s, the higher the value is, the brighter the image is;
Schedule Mode: You can customize the schedule to ena-
ble/disable Auto
Mode and Manual Mode.
BLC Region
Increasing the exposure level, objects of observation become
brighter and clearer, but bright areas become even brighter.
Off: Calculate the full range of view and offer appropriate
light compensation
Customize: This option enables you to customize inclusive or
exclusive region manually
Centre: This option will automatically add an inclusive re-
gion in the middle of the window and give the necessary light
compensation
Wide Dynamic
Range
This function which can capture and display both bright and
dark areas in the same frame enables details of objects in both
bright and dark areas to be visible.
Off: Disable WDR function
On: Enable the WDR, there are Low/High/Auto three levels
Customize: Customize the schedule to enable/disable the
WDR function and set the levels with Low/High/Auto
Wide Dynamic
Level
Set WDR with Low/High/Auto level
Anti-flicker
Level
Reduce flickers that appear on screen in some lighting condi-
tions
High Light
Compensation
Off: Disable HLC function
General Mode: Enable the general mode of HLC, and there is
a setting for HLC Level

Table of Contents