VisorJet VJS-B620-2-LPR - Page 61

61
ВАРШ.201219.009РЭ
Tab
Button
Description
Enhanced Mode: Enable the enhanced mode of HLC, and
there is a setting for HLC Level
HLC Level
Use the slider to select the HLC level.
When using cameras with the license plate recognition function
and the HLC function for fixing the license plate, the IR illumi-
nation must be turned off or reduced. The plates are covered
with reflective paint, the backlight will reflect from the license
plate in the direction of the camera, and the HLC will mask the
plate.
Day
Enhancement
Mode
BLC/WDR/HLC are available.
Night
Enhancement
Mode
BLC/WDR/HLC are available.
Schedule Setting
Customize the schedule to enable/disable BLC/WDR/HLC
mode.
Day/Night
Mode
Exposure Level
Level 0~10 are available to meet your need
Minimum
Shutter
Set the minimum Shutter to 1~1/100000s
Maximum
Shutter
Set the maximum Shutter to 1~1/100000s
Limit Gain
Level
Set the Gain level from 1 to 100
IR-CUT Latency
The interval time of switching one mode to another
IR-CUT
Turn on or turn off IR-CUT
IR LED
Turn on or turn off IR-LED
Color Mode
Select B/W or Color mode under Day/Night mode
OSD
Video Stream
Enable to set OSD for primary stream/secondary/ tertiary
stream
Font Size
Smallest/Small/Medium/Large/Largest/Auto are available for
title and date
Font Color
Enable to set different color for title and date
Show Video
Title
Turn on / off Video Title
Video Title
Customize the OSD content
Text Position
OSD display position on the image
Добавить дату
Включить/выключить отображение даты
Date Position
Date display position on the image
Date Format
The format of date
Copy to Other
Streams
Copy the settings to other streams