VisorJet VJS-B620-2-LPR - Page 70

70
ВАРШ.201219.009РЭ
Tab
Button
Description
Alarm recording
Select video recording time interval from 5 to 30 seconds
Pre-recording
Select the video recording time interval preceding the event
from 0 to 10 seconds.
Snapshot:
Select the number of snapshots for an alarm event
Snapshot Inter-
val:
Choose the time interval between shots.
External Output
Action Time
Set the time interval for the alarm output from 1 to 999 seconds.
Audio Action
Settings:
Set the audio schedule to trigger different audio files and ac-
tion times in different time, which is corresponded to alarm
action.
Play Audio In-
terval
Auto / 10 seconds / 30 seconds / 1 minute / 5 minutes / 10
minutes
Flashlight mode
Flash: The white LED will flash continuously when an alarm
event occurs;
Normal: The white LED will be on steadily when an alarm
event occurs.
Blinking interval
Flash duration:
Flash mode - from 1 second to 10 seconds;
Normal mode - from 1 second to 60 seconds.
Effective
flashlight mode
Normal / Lighting / Manual
Proportional
zoom speed
Zoom speed selection
PTZ Motion
Recovery Time
Duration of one alarm.
Should be no less than the flashlight's operating time.
Audio Alarm
Enable Audio
Alarm
Check the box to enable.
Schedule
settings
Indicate operating time.
Alarm Action
Selecting a notification when an alarm is triggered.
Save into SD
card:
Select file format: AVI, JPG or both
Save Into NAS
Select file format: AVI, JPG or both
Upload Via FTP
Select file format: AVI, JPG or both
Upload Via
SMTP
File format: JPG
External Output
If the camera equips with External Output, you can enable the
action after configuring the trigger duration
Play Audio
If the camera equips with Speaker, you can enable the action
after configuring the audio speaker
Alarm to SIP
Phone
Support to call the SIP phone after enable the SIP function