71
ВАРШ.201219.009РЭ
Send HTTP event notification. Specify the URL, username and
password, example: http://ip:8601/Interface/Cameras/Mo-
tionDetection/Notify?Camera=CameraName
HTTP Name: admin (логин камеры)
HTTP Password: en123456 (пароль камеры)
Turns on the flashlight when an alarm event occurs. For PTZ
series camera only.
When a motion detector is triggered, allows the camera to fol-
low the object.
Disables on-touch patrol. For PTZ series camera only.
Selecting an action when alarm is triggered.
Select the number of snapshots for an alarm event
Choose the time interval between shots.
External Output
Action Time
Set the time interval for the alarm output from 1 to 999 seconds.
Set the audio schedule to trigger different audio files and action
times in different time, which is corresponded to alarm action.
Auto / 10 seconds / 30 seconds / 1 minute / 5 minutes / 10
minutes
Enable Alarm Input. Select Normal, High or Low. You can also
observe the current state of the input.
Selecting a notification when an alarm is triggered.
Select file format: AVI, JPG or both
Select file format: AVI, JPG or both
Select file format: AVI, JPG or both
If the camera equips with External Output, you can enable the
action after configuring the trigger duration
If the camera equips with Speaker, you can enable the action
after configuring the audio speaker
Support to call the SIP phone after enable the SIP function
Send HTTP event notification. Specify the URL, username and
password, example: http://ip:8601/Interface/Cameras/Mo-
tionDetection/Notify?Camera=CameraName
HTTP Name: admin (логин камеры)
HTTP Password: en123456 (пароль камеры)
Selecting an action when alarm is triggered.
To Next Page
Loading...