EasyManua.ls Logo

VisorJet VJS-B620-2-LPR - Page 72

Default Icon
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
72
ВАРШ.201219.009РЭ
Tab
Button
Description
Alarm recording
Select video recording time interval from 5 to 30 seconds
Pre-recording
Select the video recording time interval preceding the event
from 0 to 10 seconds.
Snapshot:
Select the number of snapshots for an alarm event
Snapshot Inter-
val:
Choose the time interval between shots.
External Output
Action Time
Set the time interval for the alarm output from 1 to 999 seconds.
Audio Action
Settings:
Set the audio schedule to trigger different audio files and action
times in different time, which is corresponded to alarm action.
Play Audio In-
terval
Auto / 10 seconds / 30 seconds / 1 minute / 5 minutes / 10
minutes
Exception
Alarm Type
Alarm type selection: Network Disconnected, IP Address Con-
flict
Enable Network
Disconnected
Alarm
Select enable / disable alarm
Enable IP
Conflict Alarm
Select enable / disable alarm
Save into SD
card:
Select file format: AVI, JPG or both
External Output
Setting the alarm output when an event occurs, select the nor-
mal state, you can also observe the output state in the window
Play Audio
If the camera equips with Speaker, you can enable the action
after configuring the audio speaker
Alarm actions
Selecting an action when alarm is triggered.
Alarm recording
Select video recording time interval from 5 to 30 seconds
Pre-recording
Select the video recording time interval preceding the event
from 0 to 10 seconds.
Snapshot:
Select the number of snapshots for an alarm event
Snapshot Inter-
val:
Choose the time interval between shots.
External Output
Action Time
Set the time interval for the alarm output from 1 to 999 seconds.
Audio Action
Settings:
Set the audio schedule to trigger different audio files and action
times in different time, which is corresponded to alarm action.
Play Audio In-
terval
Auto / 10 seconds / 30 seconds / 1 minute / 5 minutes / 10
minutes
External Input
Normal Status
Select the default alarm output state:
Open / Grounded
Current Status
Displays the current output position
Б.2.5.2 Storage

Table of Contents