VisorJet VJS-B620-2-LPR - Page 77

77
ВАРШ.201219.009РЭ
Figure B.17 - The "SIP" tab
Description of the SIP tab is presented in Table B.5.4
Table B.5.4 - Buttons of the SIP tab
Tab
Button
Description
SIP Settings
Enable
Start / stop SIP protocol
Register Mode
Select enable / disable.
Enable means the mode of using the SIP protocol with the
registration of the Account.
Disable refers to Direct IP mode, use the IP address to call.
User ID
SIP ID
User Name
SIP account name
Password
SIP account password
Server Address
Server IP address
Server Port
Server port
Connection Pro-
tocol
UDP/TCP
Video Stream
Choose the video stream
Max Call Dura-
tion
The max call duration when use SIP . 0 - unlimited.
Alarm Phone
List
Phone Type
Phone Number(Call by phone number) & Direct IP Call
(Check to accept peer to peer IP call).
To Phone Num-
ber/
IP Address
Call by phone number or IP address.
Remark Name
Display name.
Duration
The time schedule to use SIP.
White List
Phone Type
Phone Number(Call by phone number) & Direct IP Call
Enter phone number or IP address
Enable White List
Number Filter
When enabled, only the designated phone number or IP address
can visit.
B.2.5.5 VCA
VCA is used in a wide range of domains including entertainment, health-care, retail, auto-
motive, transport, home automation, safety and security. VCA provides advanced, accurate smart
video analysis for network cameras. It enhances the performance of network cameras through 8
detection modes: Region Entrance, Region Exiting, Advanced Motion Detection, Tamper Detec-
tion, Line Crossing, Loitering, Human Detection, People Counting.