Vitec Multimedia MGW Ace - Retrieving or Setting Network Parameters through a USB Thumb Drive

MGW Ace Encoder HEVC Encoding and Streaming Appliance
User Manual, Version 2.1 16
To configure the appliance's network settings for the first time using an SSH client:
1. Open an SSH terminal window (PuTTY is the recommended tool).
2. Connect to the MGW Ace Encoder IP address.
3. At the login prompt, type "root" and at the password prompt type the password (the
default is "1qaz!QAZ").
The main menu appears:
Figure 3-3: The Main Menu window