Vitec Multimedia MGW Ace - Page 59

MGW Ace Encoder HEVC Encoding and Streaming Appliance
User Manual, Version 2.1 56
To set KLV IP Stream:
Figure 4-15: The IP Stream screen
Click the IP Stream tab and set the following parameters:
Parameter
Description
Input NIC
Select the input network interface.
IP address
For unicast KLV stream - enter the IP address of the encoder.
For multicast KLV stream - enter the IP address of the multicast group KLV
is sent to.
Port
Enter the port number of the source KLV multicast or unicast stream.
Encapsulation
Select one of the following options:
• TS (MPEG-2 Transport Stream encapsulation) sent via multicast or
unicast stream.
• RAW KLV data as per MISB 0601.x sent via multicast or unicast stream.
PID Number
Enter the PID number of the program containing the KLV data in the source
stream (available only when TS encapsulation is selected).
Bitrate (bps)
Enter the maximal bitrate value of the KLV Stream. It is the maximal KLV
bitrate allowed, including multiplexer overhead.