MGW Ace Encoder HEVC Encoding and Streaming Appliance
User Manual, Version 2.1 77
NOTE:
Configure the buffer size according to your network performance and the compression settings of the streams.
When B-Frames are used, it is recommended to set VLC UDP buffer to 300 to allow for smooth playback. To
reduce end-to-end latency when B-Frames are not in use, you may set the UDP buffer size to as low as 100 ms,
depending on your network characteristics. In certain network environments you may need to adjust the decoder
buffers to large size to allow for smooth playback while maintaining minimal latency.
To Next Page
Loading...
