MGW Diamond Multi-Channel HEVC and H.264 Portable Encoder
User Manual, Version 1.6 70
NOTE:
• VLC doesn't support FEC so while it is possible to play Pro-MPEG stream, no error correction will occur.
• Older versions of VLC do not require "@" symbol.
• IP address is the Target Address as set in Channels page, Target section.
• The port number is the Target Port as set in the Channels page, Target section.
To set VLC Player using SAP protocol:
1. From VLC main menu select View>Playlist. The Playlist window appears.
2. Under Media Browser, expand Local Network and select Network Stream. A list of
available streams appears.
3. Select the desired stream you wish to play.
NOTE:
SAP must be activated in Channels page, Target section, as shown in the figure
below.
To Next Page
Loading...
