Section 3 - Programming
Operation Manual
VKI Publication #100308-003
Brewing
All water temperature related settings and the waste chute option are set in this tab.
Water Temperature
Vend Enable
By activating and setting the 'Vend Enable' feature, you are setting the minimum temperature
at which the machine will brew a beverage. Should the temperature drop below this setting, you
will not be able to brew a beverage and the screen will display a 'Tank is Heating' message.
Set Point
The 'Set Point' is the temperature at which the heating system maintains the water in the tank.
To change the 'Set Point', tap on the temperature setting and use the scroll list to change the
setting and press 'Done' to save it.
To Next Page
Loading...
