Voltech PM1000+ - Unit Configuration; Explanation of Adjustment Type

QUICK START
Page 18 © Voltech 2010 PM1000+ Power Analyzer User Manual
Voltech Instruments PM1000+
Serial Number:
100008200001
Firmware Version
4.13RC4
Start Date (YYYYMMDD):
10/30/2008
Start Time (24hr):
8:00:33
Index
Vrms
Arms
Watt
Freq
PF
1
2.09E-01
2.90E-03
1.83E-04
0
3.02E-01
2
2.08E-01
2.90E-03
1.83E-04
0
3.03E-01
3
2.08E-01
2.91E-03
1.82E-04
0
3.01E-01
4
2.08E-01
2.90E-03
1.83E-04
0
3.02E-01
USB Flash Drive Requirements:
The USB flash drive must be formatted with FAT12, FAT16 or FAT32 file
systems.
Sector size must be 512 bytes. Cluster size up to 32kB.
Only Bulk Only Mass Storage (BOMS) devices which support the SCSI or
AT command sets are supported. For more information on BOMS devices
refer to Universal Serial Bus Mass Storage Class – Bulk Only Transport
Rev. 1.0, published by the USB Implementers Forum.
2.10. UNIT CONFIGURATION
To view unit configuration data including hardware revision, firmware revision, serial
number, date and type of last adjustment, and whether IEC mode has been enabled,
using the menu system, select:
System Configuration → Unit Configuration
Explanation of Adjustment Type
The following descriptions are possible for adjustment type.
Adjustment
Type
Explanation
None
No adjustment applied.
Limited
Adjustment of limited range of magnitude and frequency.