Voltech PM1000+ - 7 Specification; Mechanical; Accessories; Power Supply

SPECIFICATION
PM1000+ Power Analyzer User Manual © Voltech 2010 Page 70
7. SPECIFICATION
7.1. MECHANICAL
Height 102mm including feet.
Width 223mm without Handle
Width 260mm with Handle
Depth 285mm without Handle
Depth 358mm with Handle Straight out
Weight = 3.2Kg with handle
Accessories
Voltech supplies the PM1000+ Rack Mount Shelf Fixing kit (VPN: 130-024) to mount
the PM1000+ in a 19” wide cabinet. A suitable shelf is recommended.
Call your Voltech representative for more information.
7.2. POWER SUPPLY
AC input voltage = 85 - 264V, 45 to 65Hz
Protection = 1AT, 20mm fuse
Consumption = 25VA max.
7.3. COMMUNICATIONS
RS232
9-pin d-type female.
Requires „straight through‟ (modem) cable for a pc connection.
1 - open
2 - Tx (o/p)
3 - Rx (i/p)
4 -open