THE MENU SYSTEM
PM1000+ Power Analyzer User Manual © Voltech 2010 Page 26
4. THE MENU SYSTEM
4.1. NAVIGATION
The PM1000+‟s menu is a powerful yet easy-to-use system for control of the analyzer.
See the „Quick Start‟ section of this manual for an overview of how to access and use
the menu system.
For help at any time whilst using the PM1000+ press the HELP key at any time.
4.2. MENU ITEMS
To switch the display of the menu system off or on, press the „MENU‟ key at any time.
4.3. MAIN MENU
To select a menu, press .
4.4. MEASUREMENTS.
Choose the measurements to display.
To add a new measurement:
1. Select it and press .
2. (Option). Move the measurement (does not apply to harmonics)
3. Press OK.
To remove a measurement, select it and press X
Hint:
To restore the default list, see the User Configuration Menu.
For information on setup for harmonics and distortion factor, see section 4.10
System Configuration.
To Next Page
Loading...
