RELEASE HISTORY
Page 88 © Voltech 2010 PM1000+ Power Analyzer User Manual
Specification added to section 7.5 for IEC current harmonics mode and Voltage
Flicker mode.
Added section 6 which details all the available software for the PM1000+.
Clarified specification examples in section 7.5.
Version 8 to Version 9 (Version 4.21 firmware).
Change made to Frequency Filter description regarding signals that are a small
percentage of range (see section 4.6).
Added communication commands to configure Harmonic THD parameters in
section 5.2.
Version 9 to Version 10 (Version 4.21 firmware).
Added specification for current channel common mode rejection in section 7.5.
Add notes to the description of Standby mode in section 4.5.
Version 10 to Version 11 (Version 4.22 firmware).
Added an improved specification for 45-65Hz, Volts, Amps and Watts.
To Previous Page
Loading...
