Contrast and backlighting
The button on the far right is used to adjust contrast
and panel
backlighting. The button is also used to con-
firm fault messages.
Backlighting
Contrast
Press the button to adjust the contrast and the back-
lighting.
Use
+
and – to increase or reduce the contrast or back-
lighting.
Adjustments affect all screens in the system.
Fault message
is displayed on the screen when the system dis-
covers a fault.
All fault messages must be acknowledged. Acknowl-
edge by
pressing the button; if the fault is accompanied
by an audible signal, the signal will silenced. Go to the
information panel to get information regarding the
alarm.
For further information on how to handle fault mes-
sages and recommended actions, refer to the Fault
Handling page 67 and Fault Code Register chapters.
Syncronisation panel
The engine synchronization function can be switched
off at the synchronization panel to allow engine speeds
to be controlled independently. In triple installations,
the midships engine receives an average of the two
outboard engines' speeds.
Switch on synchronization by pressing the button.
Instruments and Controls
47705796 05-2014 © AB VOLVO PENTA 15
To Next Page
Loading...
