You can add cordless handsets (CM18045, purchased separately)
to your console. Each handset must be registered with the console
before use. The handsets are assigned with available extension
numbers starting from 1 in ascending order (1 to 9).
Make sure the cordless handset is properly installed before you
begin registration. Refer to the user’s manual of the cordless
handset for details. If the handset does not have enough power to
proceed with the registration, you need to charge the new handset
for at least five minutes.
To register a handset to your console
Make sure the CM18045 handset is out of the charger
and the screen shows 1) Press MENU on Console
->Registration ->Register Ext. 2) Press # on this
extension to register. before you begin registration.
1. On the console, press MENU/SELECT.
2. Press or to scroll to Registration, then press
MENU/SELECT or SKIP .
3. Press MENU/SELECT or SKIP again to select
Register Ext.
4. On the handset, press #. The handset shows The handset shows
Registering....
5. The handset beeps once and begins registering to
the console. It takes up to 60 seconds to complete
the registration. There is a beep sound when the
registration is successful. Both the console and the
handset show Handset X registered. (X represents
the extension number 1-9).
NOTES:
If the registration is not successful, the console screen displays
Registration failed. Try the registration process again.
You can continue to register a second handset by following step 3
on the console and step 4 on the handset. If no action is taken, the
console will return to idle mode.
•
•
Getting started
Adding and registering a cordless handset
11
CM18445:
CM18045:
To Next Page
Loading...
Need help?
General
