VTech CM18445 - Dial Mode; Factory Reset; User Support

35
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
When the console is idle, press MENU/SELECT.
Press or to scroll to Dial mode, then press MENU/SELECT or
/SKIP.
Press or to scroll to Touch-tone or Pulse.
Press MENU/SELECT or /SKIP to save the setting and return to the
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
1.
2.
3.
4.
Factory reset
Use this feature to reset all settings of this console to their default settings.
All phone settings, directory, call history, redial list, speed dial memory, and
general mailbox messages will be reset. All cordless devices will also be
deregistered.
Make sure the telephone system is idle before you reset the console.
When the console is idle, press MENU/SELECT.
Press or to scroll to Factory reset.
Press MENU/SELECT or /SKIP. The screen displays Are you sure to reset
console?.
Press or to scroll to Yes or No.
Press MENU/SELECT or /SKIP to confirm. The console reboots upon
completion of the reset process.
NOTES:
The reset process may take up to 10 minutes to complete, depending on the number of voice
messages across the whole system.
The whole system is not functional while the console is resetting. Do not power off the console
during this period.
1.
2.
3.
4.
5.
•
•
User support
Use this feature to display the VTech website.
When the console is idle, press MENU/SELECT.
Press or to scroll to User support, then press MENU/SELECT or
/SKIP.
Press CANCEL or /REPEAT to return to the main menu.
1.
2.
3.
Settings
Console setup