32
Call privacy
The call privacy is set to Off by default. The console allows other extensions
to join a call in progress. You can turn this setting on to ensure that only one
device uses a line at a time.
When the console is idle, press MENU/SELECT.
2. Press or to scroll to Console setup, then press MENU/SELECT or
/SKIP.
3. Press or to scroll to Call privacy, then press MENU/SELECT or /SKIP.
4. Press or to scroll to On or Off.
5. Press MENU/SELECT or /SKIP to save the setting and return to the
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
NOTE: To temporarily change the call privacy setting during a call, see page 40.
1.
Settings
Console setup
To Next Page
Loading...
