63
How the caller ID information works
The console stores caller ID information for the last 50 incoming calls in the
console. Entries are stored in reverse chronological order. The console deletes
the oldest entry when the log is full to make room for new calls.
Each extension has independent caller ID information. Deleting the caller ID
information on any one extension does not affect the caller ID information on
other extensions.
If you answer a call before the information appears on the screen, it does not
show in the caller ID information.
Review the caller ID information to determine who called, to easily return the
call, or to copy the caller’s name and number into your directory or speed dial
memory.
The time and date of the call and the caller’s name and telephone number are
included in the display.
Caller ID information appears on the screen as the telephone rings, the caller
hangs up, the call has been answered at another extension, or until the call
ends.
If you subscribe to caller ID service, this phone automatically resets the time
and date using the caller ID information from the first incoming call after initial
setup, or each time the power resumes after a power outage.
NOTES:
The caller ID information might not be available for every incoming call. Callers might
intentionally block their names and/or telephone numbers.
Each entry can store up to 24 digits for the telephone number and 16 characters for the name.
•
•
Call history
Caller ID information
To Next Page
Loading...
Need help?
General
