36
The console comes programmed to select a line automatically for calls when
you do not press a line key. To override the automatic line selection setting,
see Primary line on page 31 for details. When you answer a call, the console
automatically selects the ringing line.
Line indicators
Each of the four indicators on LINE 1-LINE 4 indicate
the state of the corresponding telephone line.
On when the corresponding line is in use.
Flashes slowly when the line is on hold.
Flashes quickly when there is a transferred call on
the corresponding line.
Flashes quickly when there is an incoming auto attendant transferred call on
the corresponding line.
Flashes quickly when there is an incoming call on the corresponding line.
Making and ending a call
To make a call using the console:
Lift the handset or press SPEAKER .
-OR-
To override automatic line selection, press LINE 1-LINE 4 for the desired
line, then lift the handset.
2. Wait for a dial tone, then enter the telephone number. The screen displays
the elapsed time as you talk (in hours, minutes and seconds).
To end a call using the console:
Place the handset on the console to hang up.
-OR-
If you are using the speakerphone, press SPEAKER to hang up.
NOTE: The elapsed time is not affected by accessing services from your telephone
service provider.
•
•
•
•
•
1.
•
•
Operation
Console operation
To Next Page
Loading...
Need help?
General
