15
Getting started
System setup
The answering system displays the date and time of the message while playing
messages. Before using the answering system, follow the steps below to set
the month, day, year and time.
When the console is idle, press MENU/SELECT.
Press or to scroll to Date and time, then press MENU/SELECT or
/SKIP.
Use the dialing keys to enter the month (MM), day (DD) and year (YY), or
press or to increase or decrease the digits. Press /REPEAT or
/SKIP to scroll between month, day and year.
Press MENU/SELECT to move to the time setting.
Use the dialing keys to enter the hour and minute, or press or to
increase or decrease the digits and toggle between am and pm. Press
/REPEAT or /SKIP to scroll between the hour (HH), minute (MM) and
am/pm.
If you enter digits larger then 12 in the hour field, the system automatically
converts to the 12-hour time format.
6. Press MENU/SELECT to save the setting and return to the previous menu.
To exit without making changes, press CANCEL.
NOTES:
If the date and time are not set when a message is recorded, the system does not display date
and time on the screen while playing messages.
The date and time settings on the console are synchronized with other extensions automatically.
1.
2.
3.
4.
5.
•
•
•
Set date and time
To Next Page
Loading...
Need help?
General
