27
Getting started
Alert tones and lights
Alert tones
One beep The console is recording an announcement or memo.
Two beeps You have set the hold reminder on; a call has been on hold for
more than three minutes.
-OR-
You have set the message alert tone on.
-OR-
There is an incoming call waiting.
Lights
Large lighted display
LINE 1/LINE 2/LINE 3/LINE 4
On when the telephone line is in use.
Flashes slowly when the telephone line is
on hold.
Flashes quickly when there is an incoming
call or a transfer call.
•
•
•
MESSAGE WAITING
Turns on when there
are new messages.
•
INTERCOM
On when the
console is on an
intercom call.
Flashes slowly when
the console is holding
an intercom call.
Flashes quickly when
there is an incoming
intercom call.
•
•
•
MUTE
On when the
microphone is muted.
•
PAGE
On when a one-
to-one or one-to-
group broadcast is
established.
•
SPEAKER
On when the
speakerphone is on.
•
HEADSET
On when the corded
headset is in use.
•
DND
On when the do not
disturb function is on.
•
To Next Page
Loading...
